Cisco SPA8800 Configuring

Configuring the Cisco SPA8800 IP Telephony Gateway in an Asterisk Environment
© 2009 Cisco Systems, Inc. All rights reserved. Page 47 of 69
Branch: z9hG4bK-e5988af5
Received: 192.168.2.237
From: "SPA8k8Phone1" <sip:101@192.168.2.20>;tag=377ea678f1613b1o0
SIP Display info: "SPA8k8Phone1"
SIP from address: sip:101@192.168.2.20
SIP tag: 377ea678f1613b1o0
To: <sip:102@192.168.2.20>;tag=as4fc6eca0
SIP to address: sip:102@192.168.2.20
SIP tag: as4fc6eca0
Call-ID: c677a744-912e2955@192.168.2.237
CSeq: 102 INVITE
Sequence Number: 102
Method: INVITE
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Supported: replaces
Contact: <sip:102@192.168.2.20>
Contact Binding: <sip:102@192.168.2.20>
URI: <sip:102@192.168.2.20>
SIP contact address: sip:102@192.168.2.20
Content-Type: application/sdp
Content-Length: 380
Message Body
Frame 89 (597 bytes on wire, 597 bytes captured)
Ethernet II, Src: 00:24:97:f0:50:3c (00:24:97:f0:50:3c), Dst: Internet_1c:33:a1
(00:e0:4d:1c:33:a1)
Internet Protocol, Src: 192.168.2.237 (192.168.2.237), Dst: 192.168.2.20 (192.168.2.20)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
Request-Line: ACK sip:102@192.168.2.20 SIP/2.0
Method: ACK
[Resent Packet: False]
Message Header
Via: SIP/2.0/UDP 192.168.2.237:5060;branch=z9hG4bK-2deeb45a
Transport: UDP
Sent-by Address: 192.168.2.237
Sent-by port: 5060
Branch: z9hG4bK-2deeb45a
From: "SPA8k8Phone1" <sip:101@192.168.2.20>;tag=377ea678f1613b1o0
SIP Display info: "SPA8k8Phone1"
SIP from address: sip:101@192.168.2.20
SIP tag: 377ea678f1613b1o0
To: <sip:102@192.168.2.20>;tag=as4fc6eca0
SIP to address: sip:102@192.168.2.20
SIP tag: as4fc6eca0
Call-ID: c677a744-912e2955@192.168.2.237
CSeq: 102 ACK
Sequence Number: 102
Method: ACK
Max-Forwards: 70
Proxy-Authorization: Digest
username="101",realm="asterisk",nonce="111dc491",uri="sip:102@192.168.2.20",algorithm=MD5,resp
onse="89c9bfa2d386061dad5b67972ddd3ec4"
Authentication Scheme: Digest
Username: "101"
Realm: "asterisk"
Nonce Value: "111dc491"
Authentication URI: "sip:102@192.168.2.20"
Algorithm: MD5
Digest Authentication Response: "89c9bfa2d386061dad5b67972ddd3ec4"
Contact: "SPA8k8Phone1" <sip:101@192.168.2.237:5060>
Contact Binding: "SPA8k8Phone1" <sip:101@192.168.2.237:5060>
URI: "SPA8k8Phone1" <sip:101@192.168.2.237:5060>
SIP Display info: "SPA8k8Phone1"
SIP contact address: sip:101@192.168.2.237:5060
User-Agent: Cisco/SPA8800-6.1.7(GW)
Content-Length: 0
Frame 90 (396 bytes on wire, 396 bytes captured)
Ethernet II, Src: 00:24:97:f0:50:3c (00:24:97:f0:50:3c), Dst: Internet_1c:33:a1
(00:e0:4d:1c:33:a1)
Internet Protocol, Src: 192.168.2.237 (192.168.2.237), Dst: 192.168.2.20 (192.168.2.20)
User Datagram Protocol, Src Port: 5160 (5160), Dst Port: sip (5060)
Session Initiation Protocol
Request-Line: BYE sip:101@192.168.2.20 SIP/2.0
Method: BYE
[Resent Packet: False]
Message Header
Via: SIP/2.0/UDP 192.168.2.237:5160;branch=z9hG4bK-6edcb597
Transport: UDP
Sent-by Address: 192.168.2.237
Sent-by port: 5160
Branch: z9hG4bK-6edcb597
From: <sip:102@192.168.2.237>;tag=cf247750d7f2b62ei0

Cisco SPA8800 Specifications

General

Brand	Cisco
Model	SPA8800
Category	Gateway
Language	English