Cisco SPA8800 Configuring

Configuring the Cisco SPA8800 IP Telephony Gateway in an Asterisk Environment
© 2009 Cisco Systems, Inc. All rights reserved. Page 48 of 69
SIP from address: sip:102@192.168.2.237
SIP tag: cf247750d7f2b62ei0
To: "SPA8k8Phone1" <sip:101@192.168.2.20>;tag=as57eae9e2
SIP Display info: "SPA8k8Phone1"
SIP to address: sip:101@192.168.2.20
SIP tag: as57eae9e2
Call-ID: 3512588b465552ee7ec40bea27c3f72d@192.168.2.20
CSeq: 101 BYE
Sequence Number: 101
Method: BYE
Max-Forwards: 70
User-Agent: Cisco/SPA8800-6.1.7(GW)
Content-Length: 0
Frame 91 (494 bytes on wire, 494 bytes captured)
Ethernet II, Src: Internet_1c:33:a1 (00:e0:4d:1c:33:a1), Dst: 00:24:97:f0:50:3c
(00:24:97:f0:50:3c)
Internet Protocol, Src: 192.168.2.20 (192.168.2.20), Dst: 192.168.2.237 (192.168.2.237)
User Datagram Protocol, Src Port: sip (5060), Dst Port: 5160 (5160)
Session Initiation Protocol
Status-Line: SIP/2.0 200 OK
Status-Code: 200
[Resent Packet: False]
Message Header
Via: SIP/2.0/UDP 192.168.2.237:5160;branch=z9hG4bK-6edcb597;received=192.168.2.237
Transport: UDP
Sent-by Address: 192.168.2.237
Sent-by port: 5160
Branch: z9hG4bK-6edcb597
Received: 192.168.2.237
From: <sip:102@192.168.2.237>;tag=cf247750d7f2b62ei0
SIP from address: sip:102@192.168.2.237
SIP tag: cf247750d7f2b62ei0
To: "SPA8k8Phone1" <sip:101@192.168.2.20>;tag=as57eae9e2
SIP Display info: "SPA8k8Phone1"
SIP to address: sip:101@192.168.2.20
SIP tag: as57eae9e2
Call-ID: 3512588b465552ee7ec40bea27c3f72d@192.168.2.20
CSeq: 101 BYE
Sequence Number: 101
Method: BYE
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Supported: replaces
Contact: <sip:101@192.168.2.20>
Contact Binding: <sip:101@192.168.2.20>
URI: <sip:101@192.168.2.20>
SIP contact address: sip:101@192.168.2.20
Content-Length: 0
Frame 92 (379 bytes on wire, 379 bytes captured)
Ethernet II, Src: Internet_1c:33:a1 (00:e0:4d:1c:33:a1), Dst: 00:24:97:f0:50:3c
(00:24:97:f0:50:3c)
Internet Protocol, Src: 192.168.2.20 (192.168.2.20), Dst: 192.168.2.237 (192.168.2.237)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
Request-Line: BYE sip:101@192.168.2.237:5060 SIP/2.0
Method: BYE
[Resent Packet: False]
Message Header
Via: SIP/2.0/UDP 192.168.2.20:5060;branch=z9hG4bK7acb7fbb;rport
Transport: UDP
Sent-by Address: 192.168.2.20
Sent-by port: 5060
Branch: z9hG4bK7acb7fbb
RPort: rport
From: <sip:102@192.168.2.20>;tag=as4fc6eca0
SIP from address: sip:102@192.168.2.20
SIP tag: as4fc6eca0
To: "SPA8k8Phone1" <sip:101@192.168.2.20>;tag=377ea678f1613b1o0
SIP Display info: "SPA8k8Phone1"
SIP to address: sip:101@192.168.2.20
SIP tag: 377ea678f1613b1o0
Call-ID: c677a744-912e2955@192.168.2.237
CSeq: 102 BYE
Sequence Number: 102
Method: BYE
User-Agent: Asterisk PBX
Max-Forwards: 70
Content-Length: 0
Frame 93 (338 bytes on wire, 338 bytes captured)
Ethernet II, Src: 00:24:97:f0:50:3c (00:24:97:f0:50:3c), Dst: Internet_1c:33:a1
(00:e0:4d:1c:33:a1)
Internet Protocol, Src: 192.168.2.237 (192.168.2.237), Dst: 192.168.2.20 (192.168.2.20)

Cisco SPA8800 Specifications

General

Brand	Cisco
Model	SPA8800
Category	Gateway
Language	English