Cisco Spam

- Cisco Spam & Virus Blocker -
- Quick Start Guide -
The Blocker has two network ports: Data 1 and Data 2.
For the purposes of setup, connect to Data 1 as your management
interface and congure incoming email on the Data 2 interface.
You can change these settings after the initial installation if you wish.
96I6
H:G>6A
&
'
47-21639-01
96I6
H:G>6A
&
'
Connect to the Blocker
Connect the
Data 1 port to your
computer using an
ethernet cable.
Connect the
Data 2 port to the
network using an
ethernet cable.
DATA 1
management: 192.168.42.42
6
DATA 2
incoming email