Cisco SX350 Series User Manual

Status and Statistics
TCAM Utilization
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x 44
4
The TCAM Utilization page shows the following fields:
• Unit No—Unit in stack for which TCAM utilization appears. This is not displayed
when the device is in not part of a stack.
• Maximum TCAM Entries for Routing and Multicast Routing—Maximum router
TCAM entries available for routing and Multicast Routing.
• IPv4 Routing
- In Use—Number of router TCAM entries used for IPv4 routing.
- Maximum—Number of available router TCAM entries that can be used for IPv4
routing.
• IPv4 Multicast Routing
- In Use—Number of router TCAM entries used for IPv4 Multicast routing.
- Maximum—Number of available router TCAM entries that can be used for IPv4
Multicast routing.
• IPv4 Policy Based Routing
- In Use—Number of router TCAM entries used for IPv4 Policy-based routing.
- Maximum—Number of available router TCAM entries that can be used for IPv4
Policy-based routing.
• IPv6 Routing
- In Use—Number of router TCAM entries used for IPv6 Multicast routing.
- Maximum—Number of available router TCAM entries that can be used for IPv6
Multicast routing.
• IPv6 Multicast Routing—Number of router TCAM entries used for IPv6 routing.
- In Use—Number of Router TCAM entries used for IPv6 routing.
- Maximum—Number of available Router TCAM entries that can be used for IPv6
routing.
• IPv6 Policy Based Routing
- In Use—Number of router TCAM entries used for IPv6 Policy-based routing.
- Maximum—Number of available router TCAM entries that can be used for IPv6
Policy-based routing.

Cisco SX350 Series Specifications

General

Brand	Cisco
Model	SX350 Series
Category	Switch
Language	English