Cisco SX350 Series User Manual

Security: IPv6 First Hop Security
Configuring IPv6 First Hop Security through Web GUI
569 Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
25
- Minimal Security Level:—If unsecure messages are not dropped, what is the
minimum security level for packets to be forwarded.
- Validate Source MAC:—Is source MAC address verification enabled.
• Neighbor Binding Status
- Neighbor Binding State on Current VLAN—Is Neighbor Binding enabled on the
current VLAN.
- Device Role—Neighbor Binding device role.
- Logging Binding—Is logging of Neighbor Binding table events enabled.
- Address Prefix Validation—Is address prefix validation enabled.
- Global Address Configuration—Which messages are validated.
- Max Entries per VLAN—Maximum number of dynamic Neighbor Binding table
entries per VLAN allowed.
- Max Entries per Interface—Maximum number of Neighbor Binding table entries
per interface allowed.
- Max Entries per MAC Address—Maximum number of Neighbor Binding table
entries per MAC address allowed.
• IPv6 Source Guard Status:
- IPv6 Source Guard State on Current VLAN—Is IPv6 Source Guard enabled on the
current VLAN.
- Port Trust—Whether the port is trusted and how it received its trusted status.
FHS Statistics
To display FHS statistics:
STEP 1 Click Security > IPv6 First Hop Security > FHS Statistics.
STEP 2 Select the Refresh Rate, the time period that passes before the statistics are refreshed.
STEP 3 The following global overflow counters are displayed:
• Neighbor Binding Table—Number of entries that could not be added to this table
because the table reached its maximum size.

Cisco SX350 Series Specifications

General

Brand	Cisco
Model	SX350 Series
Category	Switch
Language	English