Cisco TelePresence SX10 Installation Guide

Ø 4 mm
1
3
Ø 4 mm
5
2
1
6
4
2. SX10 wall mount
This type of equipment is to be installed by the submittor’s/dealer’s qualified installer. Installer is respon-
sible for obtaining safety inspection of the structural integrity of the installation by the local authority/
inspection department.
You need:
• Drill
• 2 screws, Ø4 mm
• Level
• Tape measure
• Screwdriver
• Pencil
H

Cisco TelePresence SX10 Specifications

General

Digital zoom	2 x
Optical zoom	2.65 x
Supported video modes	1080p, 720p
Video formats supported	H.263, H.264, MPEG4
Supported graphics resolutions	176 x 144, 352 x 288, 704 x 576, 1024 x 576 (WSVGA), 1024 x 768 (XGA), 1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 640 x 480 (VGA)
Voice codecs	G.711, G.711a, G.722, G.722.1, G.729, G.729A
Ethernet LAN (RJ-45) ports	1
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	12 W
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	91 mm
Width	275 mm
Height	117 mm
Weight	900 g