Cisco TelePresence System Codec C60

D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014. Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved. 154
Cisco TelePresence System Codec C40/C60 API Reference Guide
xStatus Call [n] DeviceType
Indicates whether the remote system is a single endpoint or a MCU. Some Cisco endpoints (EX90,
C40, C60, C90, SX20) have built-in MCU capabilities.
Value space of the result returned:
<Endpoint/MCU>
Example:
xStatus Call DeviceType
*s Call 4 DeviceType: Endpoint
** end
Camera status
xStatus Camera
Shows the top level overview of the camera status.
xStatus Camera [1..7] Connected
Shows if the camera is connected or not.
Value space of the result returned:
<True/False>
Example:
xStatus Camera 1 Connected
*s Camera 1 Connected: True
** end
xStatus Camera [1..7] HardwareID
Shows the hardware identity of the camera.
Value space of the result returned:
<String>
Example:
xStatus Camera 1 HardwareID
*s Camera 1 HardwareID: "50000000"
** end
xStatus Camera [1..7] Manufacturer
Shows the manufacturer of the camera.
Value space of the result returned:
<String>
Example:
xStatus Camera 1 Manufacturer
*s Camera 1 Manufacturer: "TANDBERG"
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus