Cisco TelePresence System Codec C60

D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014. Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved. 155
Cisco TelePresence System Codec C40/C60 API Reference Guide
xStatus Camera [1..7] Model
Shows the camera model.
Value space of the result returned:
<String>
Example:
xStatus Camera 1 Model
*s Camera 1 Model: "PrecisionHD 1080p 12X"
** end
xStatus Camera [1..7] SoftwareID
Shows the software identity of the camera.
Value space of the result returned:
<String>
Example:
xStatus Camera 1 SoftwareID
*s Camera 1 SoftwareID: "S01718-4.0FINAL [ID:40063] 2010-10-20"
** end
xStatus Camera [1..7] SerialNumber
Shows the camera serial number.
Value space of the result returned:
<String>
Example:
xStatus Camera 1 SerialNumber
*s Camera 1 SerialNumber: "B1AB26B00010"
** end
xStatus Camera [1..7] IpAddress
Shows the camera IP address.
Value space of the result returned:
<String>
Example:
xStatus Camera 1 IpAddress
*s Camera 1 IpAddress: ""
** end
xStatus Camera [1..7] MacAddress
Shows the MAC (Media Access Control) address for the camera.
Value space of the result returned:
<String>
Example:
xStatus Camera 1 MacAddress
*s Camera 1 MacAddress: ""
** end
xStatus Camera [1..7] Position Pan
Shows the current pan (move left and right) position of the camera. The value range depends on
camera type.
Value space of the result returned:
<-65535..65535>
Example:
xStatus Camera 1 Position Pan
*s Camera 1 Position Pan: 412
** end
xStatus Camera [1..7] Position Tilt
Shows the current tilt (move up and down) position of the camera. The value range depends on
camera type.
Value space of the result returned:
<-65535..65535>
Example:
xStatus Camera 1 Position Tilt
*s Camera 1 Position Tilt: 106
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus