Cisco TelePresence System Codec C60

D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014. Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved. 156
Cisco TelePresence System Codec C40/C60 API Reference Guide
xStatus Camera [1..7] Position Zoom
Shows the current zoom (zoom in and out) position of the camera. The value range depends on
camera type.
Value space of the result returned:
<0..65535>
Example:
xStatus Camera 1 Position Zoom
*s Camera 1 Position Zoom: 828
** end
xStatus Camera [1..7] Position Focus
Shows the current focus position of the camera. The value range depends on camera type.
Value space of the result returned:
<0..65535>
Example:
xStatus Camera 1 Position Focus
*s Camera 1 Position Focus: 4597
** end
xStatus Camera [1..7] Capabilities Options
Shows the camera capabilities (ptzf = pan, tilt, zoom, focus).
Value space of the result returned:
<String>
Example:
xStatus Camera 1 Capabilities Options
*s Camera 1 Capabilities Options: "ptzf"
** end
xStatus Camera [1..7] Flip
In Flip mode (vertical flip) the image can be flipped upside down.
Value space of the result returned:
< "A u t o"/ "O n "/ "O f f ">
Example:
xStatus Camera 1 Flip
*s Camera 1 Flip: "Off"
** end
xStatus Camera [n] UpgradeStatus
Returns the status of the camera software upgrade.
None: No upgrade going on at the moment.
Downloading: Downloading the upgrade.
Installing: Installing the upgrade.
Rebooting: Rebooting the system to take the upgrade in use.
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus