Cisco TelePresence System Codec C60 Reference Guide

D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014. Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved. 157
Cisco TelePresence System Codec C40/C60 API Reference Guide
Value space of the result returned:
<None/Downloading/Installing/Rebooting>
Example:
xStatus Camera 1 UpgradeStatus
*s Camera 1 UpgradeStatus: None
** end
xStatus Camera [n] DownloadProgress
Indicates how many percent of the new camera software upgrade has been downloaded. Result -1
indicates that the information is not available for that camera type.
Value space of the result returned:
<Integer>
Example:
xStatus Camera 1 DownloadProgress
*s Camera 1 DownloadProgress: 0
** end
Conference status
xStatus Conference
Shows the top level overview of the conference status. The identity of the Conference Site can only
be read during a call.
xStatus Conference Presentation Mode
Shows the status of the secondary video stream.
Value space of the result returned:
<Off/Sending/Receiving>
Example:
xStatus Conference Presentation Mode
*s Conference Presentation Mode: Off
** end
xStatus Conference Presentation Protocol
Shows the video protocol used when transmitting the presentation.
Value space of the result returned:
<String>
Example:
xStatus Conference Presentation Protocol
*s Conference Presentation Protocol: "H264"
** end
xStatus Conference Presentation Resolution Height
Shows the height of the the presentation.
Value space of the result returned:
<0..3000>
Example:
xStatus Conference Presentation Resolution Height
*s Conference Presentation Resolution Height: 0
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus

Cisco TelePresence System Codec C60 Specifications

General

Brand	Cisco
Model	TelePresence System Codec C60
Category	Conference System
Language	English