EasyManuals Logo

Cisco TelePresence System Codec C60 Reference Guide

Cisco TelePresence System Codec C60
224 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #185 background imageLoading...
Page #185 background image
D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014. Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved. 185
Cisco TelePresence System Codec C40/C60 API Reference Guide
xStatus Network CDP PortID
Returns the identification the switch uses of the port the endpoint is connected to.
Value space of the result returned:
<String>
Example:
xStatus Network CDP PortID
*s Network 1 CDP PortID: "GigabitEthernet1/0/23"
** end
xStatus Network CDP Duplex
Indicates the status (duplex configuration) of the CDP broadcast interface. Used by network
operators to diagnose connectivity problems between adjacent network elements.
Value space of the result returned:
<String>
Example:
xStatus Network CDP Duplex
*s Network 1 CDP Duplex: "Full"
** end
xStatus Network CDP VTPMgmtDomain
Returns the switch’s configured VTP management domain name-string.
Value space of the result returned:
<String>
Example:
xStatus Network CDP VTPMgmtDomain
*s Network 1 CDP VTPMgmtDomain: "anyplace"
** end
xStatus Network CDP Address
Returns the first network address of both receiving and sending devices.
Value space of the result returned:
<String>
Example:
xStatus Network CDP Address
*s Network 1 CDP Address: "192.0.1.20"
** end
xStatus Network CDP PrimaryMgmtAddress
Returns the management address used to configure and monitor the switch the endpoint is
connected to.
Value space of the result returned:
<String>
Example:
xStatus Network CDP PrimaryMgmtAddress
*s Network 1 CDP PrimaryMgmtAddress: "10.1.1.2"
** end
xStatus Network CDP SysName
Returns the SysName as configured in the switch the endpoint is connected to.
Value space of the result returned:
<String>
Example:
xStatus Network CDP SysName
*s Network 1 CDP SysName: ""
** end
xStatus Network CDP SysObjectID
Returns the SysObjectID as configured in the switch the endpoint is connected to.
Value space of the result returned:
<String>
Example:
xStatus Network CDP SysObjectID
*s Network 1 CDP SysObjectID: ""
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus

Other manuals for Cisco TelePresence System Codec C60

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco TelePresence System Codec C60 and is the answer not in the manual?

Cisco TelePresence System Codec C60 Specifications

General IconGeneral
BrandCisco
ModelTelePresence System Codec C60
CategoryConference System
LanguageEnglish

Related product manuals