Cisco TelePresence System Codec C60 Reference Guide

D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014. Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved. 186
Cisco TelePresence System Codec C40/C60 API Reference Guide
xStatus Network CDP VoIPApplianceVlanID
Identifies the VLAN used for VoIP traffic from the endpoint to the switch. For more information see
documentation of the IEEE 802.1Q protocol.
Value space of the result returned:
<String>
Example:
xStatus Network CDP VoIPApplianceVlanID
*s Network 1 CDP VoIPApplianceVlanID: "300"
** end
NetworkServices status
xStatus NetworkServices NTP Address
Returns the address of the NTP server(s) the codec is using.
Value space of the result returned:
<String>
Example:
xStatus NetworkServices NTP Address
*s Net work Se r v ic e s N TP A d d r ess: "12.104.193.12 64.104.222.16 144.254.15.121"
** end
xStatus NetworkServices NTP CurrentAddress
Returns the address of the NTP server that is currently in use.
Value space of the result returned:
<String>
Example:
xStatus NetworkServices NTP CurrentAddress
*s NetworkServices NTP CurrentAddress: "123.254.15.121"
** end
xStatus NetworkServices NTP Status
Returns the status of the endpoints synchronizing with the NTP server.
Unknown: State of the synchronization is unknown.
Synced: The system is in sync with the NTP server
Discarded: The NTP result has been discarded.
Value space of the result returned:
<Unknown/Synced/Discarded>
Example:
xStatus NetworkServices NTP Status
*s NetworkServices NTP Status: Synced
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus

Cisco TelePresence System Codec C60 Specifications

General

Brand	Cisco
Model	TelePresence System Codec C60
Category	Conference System
Language	English