EasyManuals Logo

Cisco Telepresence System EX60 Administrator's Guide

Cisco Telepresence System EX60
129 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #109 background imageLoading...
Page #109 background image
Cisco TelePresence System EX Series Administrator Guide
D14726.14 EX Series Administrator Guide TC7.1, APRIL 2014. www.cisco.com — Copyright © 20102014 Cisco Systems, Inc. All rights reserved.
109
Video Output HDMI [1] MonitorRole
NOTE: Applies only to EX90, and only when the Dual Display option is installed.
Define which video stream to show on the monitor connected to the HDMI output connector. Do
not change this setting manually; keep the default setting.
Value space: <Second>
Second: Show the presentation, if present, on the monitor connected to the HDMI output.
Video Output HDMI [1] OverscanLevel
NOTE: Applies only to EX90.
Some monitors may not present the entire image that it receives. This means that the outer
parts of the image that is sent out on the systems video output may be cut off when displayed
on the monitor.
Use this setting to instruct the video system to not use the outer part of the available frame, i.e.
to not use the part that might not be presented on the monitor. Both the video and messages
on screen will be scaled in this case.
Requires user role: ADMIN
Value space: <None/Medium/High>
None: The system will use all of the output resolution.
Medium: The system will not use the outer 3% of the output resolution.
High: The system will not use the outer 6% of the output resolution.
Example:
Video Output HDMI 1 OverscanLevel: None
Video Output HDMI [1] Resolution
NOTE: Applies only to EX90.
Select the preferred resolution for the monitor connected to the video output HDMI connector.
This will force the resolution on the monitor.
Requires user role: ADMIN
Value space: <Auto/640_480_60/800_600_60/1024_768_60/1280_1024_60/1280_720_50/
1280_720_60/1920_1080_50/1920_1080_60/1280_768_60/1360_768_60/1366_768_60/16
00_1200_60/1680_1050_60/1920_1200_60>
Auto: The system will automatically try to set the optimal resolution based on negotiation
with the connected monitor.
640_480_60: The resolution is 640 x 480, and the refresh rate is 60 Hz.
800_600_60: The resolution is 800 x 600, and the refresh rate is 60 Hz.
1024_768_60: The resolution is 1024 x 768, and the refresh rate is 60 Hz.
1280_1024 _60: The resolution is 1280 x 1024, and the refresh rate is 60 Hz.
1280_720_50: The resolution is 1280 x 720, and the refresh rate is 50 Hz.
1280_720_60: The resolution is 1280 x 720, and the refresh rate is 60 Hz.
1920_1080_50: The resolution is 1920 x 1080, and the refresh rate is 50 Hz.
1920_1080_60: The resolution is 1920 x 1080, and the refresh rate is 60 Hz.
1280_768_60: The resolution is 1280 x 768, and the refresh rate is 60 Hz.
1360_768_60: The resolution is 1360 x 768, and the refresh rate is 60 Hz.
1366_768_60: The resolution is 1366 x 768, and the refresh rate is 60 Hz.
1600_1200_60: The resolution is 1600 x 1200, and the refresh rate is 60 Hz.
1680_1050_60: The resolution is 1680 x 1050, and the refresh rate is 60 Hz.
1920_1200_60: The resolution is 1920 x 1200, and the refresh rate is 60 Hz.
Example:
Video Output HDMI 1 Resolution: Auto
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
System settings

Table of Contents

Other manuals for Cisco Telepresence System EX60

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Telepresence System EX60 and is the answer not in the manual?

Cisco Telepresence System EX60 Specifications

General IconGeneral
BrandCisco
ModelTelepresence System EX60
CategoryConference System
LanguageEnglish

Related product manuals