EasyManuals Logo

Cisco UCS B200 M3 Installation Manual

Cisco UCS B200 M3
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
The figure below shows how DIMMs and channels are physically laid out on the blade server. The DIMM slots in the upper and
lower right are associated with the second CPU (CPU shown on right in the diagram), while the DIMM slots in the upper and lower
left are associated with the first CPU (CPU shown on left).
Figure 20: Physical Representation of DIMMs and Channels
25

Other manuals for Cisco UCS B200 M3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco UCS B200 M3 and is the answer not in the manual?

Cisco UCS B200 M3 Specifications

General IconGeneral
System bus rate8 GT/s
Processor familyIntel
Processor socketLGA 2011 (Socket R)
Intel Xeon seriesE5-2600
Motherboard chipsetIntel C600
Compatible processor seriesIntel® Xeon®
Number of processors supported2
ECCYes
Memory form factor240-pin DIMM
Number of DIMM slots24
Supported memory typesDDR3-SDRAM
Maximum internal memory768 GB
RAID levels0, 1
Storage drive sizes supported2.5 \
Supported storage drive interfacesSerial Attached SCSI (SAS), Serial ATA III
USB 2.0 ports quantity0
On-board graphics card modelMatrox G200
Chassis type-
Product colorSilver
Storage temperature (T-T)-40 - 65 °C
Operating temperature (T-T)10 - 35 °C
Operating relative humidity (H-H)5 - 93 %
Harmonized System (HS) code84714100
Weight and Dimensions IconWeight and Dimensions
Depth620 mm
Width203 mm
Height50 mm
Weight4360 g

Related product manuals