To Next PageTo Next Page
Need help?Do you have a question about the Cisco UCS B200 M4 and is the answer not in the manual?
General| Tcase | 72.1 °C |
|---|---|
| Bus type | QPI |
| Stepping | R2 |
| FSB Parity | No |
| Scalability | 2S |
| Processor code | SR206 |
| Processor cache | 20 MB |
| Processor cores | 8 |
| Processor model | E5-2630V3 |
| System bus rate | 8 GT/s |
| Processor series | Intel Xeon E5-2600 v3 |
| Processor socket | LGA 2011-v3 |
| Processor threads | 16 |
| Processor codename | Haswell |
| Motherboard chipset | Intel C610 |
| Processor frequency | 2.4 GHz |
| Processor cache type | Smart Cache |
| Processor lithography | 22 nm |
| Processor manufacturer | Intel |
| Processor package size | 52.5 x 45 mm |
| Processor front side bus | - MHz |
| Processor boost frequency | 3.2 GHz |
| Processor operating modes | 64-bit |
| ECC supported by processor | Yes |
| Supported instruction sets | AVX |
| Thermal Design Power (TDP) | 85 W |
| Compatible processor series | Intel® Xeon® |
| Supported processor sockets | LGA 2011-v3 (Socket R) |
| Number of processors installed | 2 |
| Maximum number of PCI Express lanes | 40 |
| Memory types supported by processor | DDR4-SDRAM |
| Memory channels supported by processor | Quad |
| Memory clock speeds supported by processor | 1600, 1866 MHz |
| Memory bandwidth supported by processor (max) | 59 GB/s |
| Maximum internal memory supported by processor | 768 GB |
| Memory slots | 24x DIMM |
| Internal memory | - GB |
| Memory clock speed | 2400 MHz |
| Number of DIMM slots | 24 |
| Supported DIMM module capacities | 64GB |
| USB 2.0 ports quantity | 0 |
| Ethernet LAN (RJ-45) ports | - |
| Power supply | - W |
| Safety | UL 60950-1 No. 21CFR1040 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, IEC 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1, GB4943 2001 |
| Operating altitude | 0 - 3000 m |
| Non-operating altitude | 0 - 12000 m |
| Storage temperature (T-T) | -40 - 65 °C |
| Operating temperature (T-T) | 10 - 35 °C |
| Storage relative humidity (H-H) | 5 - 93 % |
| Ethernet interface type | 40 Gigabit Ethernet |
| RAID levels | 0, 1 |
| HDD interface | SATA |
| Storage controller | LSI SAS3108 |
| Total storage capacity | 0 GB |
| Compatible memory cards | SD |
| Maximum storage capacity | 3.2 TB |
| Storage drive sizes supported | 2.5 \ |
| Supported storage drive types | HDD & SSD |
| Supported storage drive interfaces | PCI Express, Serial ATA |
| PCI Express slots version | 3.0 |
| Intel® Virtualization Technology (Intel® VT) | VT-d, VT-x |
| Heat sink | UCSB-HS-EP-M4-F=, UCSB-HS-EP-M4-R=, UCSX-HSCK= |
| Chassis type | Rack |
| Cooling type | Active |
| Product color | Gray |
| LED indicators | Network, Power |
| Number of fans | 8 fan(s) |
| Processor ARK ID | 83356 |
| Intel Secure Key Technology version | 1.00 |
| PC health monitoring | LED |
| Sustainability certificates | Network Equipment Building Standards (NEBS) |
Weight and Dimensions| Depth | 620 mm |
|---|---|
| Width | 203 mm |
| Height | 50 mm |
Introduces the Cisco UCS B200 M4 blade server, its features, and configuration.
Details the externally accessible features and components of the blade server.
Provides a step-by-step guide for installing a half-width blade server into the chassis.
Explains how to configure Cisco UCS blade servers using Cisco UCS Manager.
Outlines the steps for safely removing a blade server from the chassis.
Step-by-step procedure for removing the heat sink and CPU from the blade server.
Instructions for installing a new CPU and its corresponding heat sink.
Detailed steps for installing DIMM modules into the blade server's memory slots.
