Cisco UCS B200 M4 - External Features Overview

Blade ejector handle2Asset pull tag
Each server has a blank plastic tag that
pulls out of the front panel which is
provided so that you can add your own
asset tracking label without interfering
with the intended air flow.
1
Hard drive bay 14Ejector captive screw3
Power button and LED6Hard drive bay 25
Blade health LED8Network link status LED7
Reset button access10Local console connector9
Locator button and LED11
External Features Overview
The features of the blade server that are externally accessible are described in this section.
LEDs
Server LEDs indicate whether the blade server is in active or standby mode, the status of the network link,
the overall health of the blade server, and whether the server is set to give a blinking blue locator light from
the locator button.
The removable drives also have LEDs indicating hard disk access activity and disk health.
Cisco UCS B200 M4 Blade Server Installation and Service Note
2
Overview
External Features Overview