Cisco UCS C220 User Manual

Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco TelePresence Content Server Release 7.0
Quick Start Guide
March 2017
This document contains information about installing and configuring the Cisco TelePresence Content
Server Release 7.0. See these sections:
• Product Overview, page 2
• Technical Specifications, page 5
• Hardware and Software Limitations, page 5
• Installing the Content Server, page 5
• Completing the Initial Configuration, page 6
– Task 1: Connect and power on the Content Server and configure CIMC, page 7
– Task 2: Set the local administrator password, page 7
– Task 3: Enter the Windows Server 2012 activation key
– Task 4: Configure a static IP address, page 9
– Task 5: Set the date and time, page 9
– Task 6: Enable Remote Desktop Connection, page 9
– Task 7: Configure SQL Settings
– Task 8: Install a security certificate
– Task 9: Configure the H.323/SIP registration settings
– Task 10: Make a test recording
• Additional Content Server Setup, page 13
• Troubleshooting and Technical Support, page 15
• Related Documentation, page 15
• Providing Documentation Feedback, page 16
• Obtaining Documentation and Submitting a Service Request, page 16

Cisco UCS C220 Specifications

General

Processor	Intel Xeon Scalable Processors
Management	Cisco Integrated Management Controller (CIMC)
Memory	Up to 3TB DDR4
Network Interface	Up to 4 x 10Gb Ethernet ports
Power Supply	Redundant power supplies, various wattage options
RAID Support	RAID 0, 1, 5, 6, 10, 50, 60

Summary

Technical Specifications

Hardware Supported

Hardware and Software Limitations

Installing the Content Server

Site Requirements and Safety Information

Completing the Initial Configuration

Task 1: Connect and power on the Content Server and configure CIMC

Step-by-step guide to power on the server and configure its management interface.

Task 2: Set the local administrator password

Instructions for changing the default administrator password for security.

Task 3: Enter the Windows Server 2012 activation key

Process for activating the Windows Server 2012 operating system.

Task 4: Configure a static IP address

Steps to assign a static IP address for network connectivity.

Task 6: Enable Remote Desktop Connection

How to configure remote access for server administration.

Task 7: Configure SQL Settings

Steps to configure SQL database settings for the server.

Task 8: Install a security certificate

Guide to installing a security certificate for secure access.

Task 9: Configure the H.323/SIP registration settings

Instructions for setting up network registration protocols.

Task 10: Make a test recording

Procedure to verify recording functionality through test calls.

Additional Content Server Setup

Troubleshooting and Technical Support

Using the server logs to help solve a problem

Getting more help