To Next PageTo Next Page
Need help?Do you have a question about the Cisco UCS C240 M5 and is the answer not in the manual?
General| Form Factor | 2U Rack |
|---|---|
| Storage Controllers | Cisco 12G SAS Modular RAID Controller |
| Management | Cisco Integrated Management Controller (CIMC) |
| Processor | Intel Xeon Scalable Processors |
| Memory | Up to 3TB DDR4 |
| Drive Bays | Up to 12 x 3.5-inch drives |
Details the physical components and interfaces on the server's front and rear panels.
Identifies the placement of key internal hardware components for service.
Provides a high-level overview of the server's technical capabilities and specifications.
Covers essential pre-installation tasks, safety guidelines, and rack requirements.
Step-by-step instructions for mounting the server securely within a standard server rack.
Guides through powering on the server and basic configuration for initial operation.
Configures network interface card settings for optimal connectivity and redundancy.
Explains the status indicators on the server's front panel for quick diagnostics.
Details the meaning of status indicators located on the server's rear panel.
Describes internal LEDs for CPUs, DIMMs, and fan modules, indicating faults.
Outlines required tools and procedures for safely preparing the server for component replacement.
Provides methods to safely power down the server before performing maintenance.
Guides on how to safely replace central processing units and their corresponding heatsinks.
Explains the use of onboard headers and jumpers for system configuration and debugging.
Lists the server's dimensions, weight, and form factor details.
Details the required operating and storage conditions for the server hardware.
Outlines the power supply options, wattage, and electrical requirements for the server.
Lists compatible storage controllers and the necessary cabling configurations.
Provides information and configuration for the server's built-in SATA RAID controller.
Guides on installing necessary drivers for the MegaSR RAID controller on various OS.
Specifies minimum server BIOS/IMC versions required for supported GPU cards.
Outlines guidelines for installing GPU cards, including slot compatibility and mixing rules.
Provides detailed steps for installing larger, double-width GPU cards into the server.
Details the process of updating server BIOS and installing GPU drivers for proper operation.
Instructions for integrating the server with Cisco UCS Manager for centralized control.
