6
Cisco TelePresence Content Server Release 7.0 Quick Start Guide
Completing the Initial Configuration
• Shipping Carton Contents, page 6
• Rack Mounting, page 6
Site Requirements and Safety Information
Select and prepare an installation site that meets the requirements that are described in the Cisco UCS
C220 Server Installation and Service Guide on Cisco.com.
For specific compliance and safety information, see the Regulatory Compliance and Safety Information
for the Cisco UCS C-Series Servers on Cisco.com.
Shipping Carton Contents
When you receive the server, verify the contents of the shipping carton to ensure that you have all items
necessary for installation. Save the packing material in case you need to repack the server. If any item is
missing or damaged, contact your Cisco representative or reseller for instructions.
The contents of the shipping carton include these items:
• Content Server
• USB media kit (used only for a software reimage)
• Rail kit
• Serial cable
• Ethernet cable
• Cable kit power
• Accessory kit
• Printed card with URLs for product documentation and RoHS information for China
Rack Mounting
For Content Server rack mounting procedures, see the “Installing the Server” chapter of the Cisco UCS
C220 Server Installation and Service Guide.
Completing the Initial Configuration
You need these items to complete the Content Server initial configuration:
• USB keyboard, mouse, and VGA monitor.
• Windows Server 2012 product activation key—see the product activation key label on the Content
Server chassis.
• IP address, subnet mask, and gateway for:
–
Content Server.
–
Cisco Integrated Management Controller (CIMC) Configuration Utility.
These are the initial configuration tasks:
To Next Page
Loading...
Need help?
General
