Reboot Access Point
There are two ways to reset the Access Point:
• Hardware reset
• Reset with the use of the web configuration utility
Reboot Access Point by Hardware
Step 1. Press the power button to turn off the device. After 10 seconds have passed,
press the power button a second time to power the device back on.
The Access Point reboots and is refreshed.
Reboot Access Point by Web Configuration Utility
Step 1. Log in to the web configuration utility and choose Administration > Reboot.
The Reboot page opens:
Step 2. Click Reboot to reboot the device.
To Next Page
Loading...
