EasyManua.ls Logo

Cisco WS-C4507R - Supervisor Switchover Process

Cisco WS-C4507R
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© 2004 Cisco Systems, Inc. All rights reserved. Printed in USA.
Presentation_ID.scr
131313
© 2004 Cisco Systems, Inc. All rights reserved.
RST-3508
9805_05_2004_c2
Supervisor Redundancy
Completes the booting sequence
Resets the modules so they can perform self diagnostics
Parses the configuration
Waits for the modules to come online and links to get
established
Builds routing tables, MAC-address tables, and other dynamic
protocols
***********************************
* STANDBY SUPERVISOR *
* REDUNDANCY mode is RPR *
* Waiting for Switchover Activity *
***********************************
cisco WS-C4507R (MPC8245) processor (revision 4) with 524288K bytes of memory.
Processor board ID FOX062105G1
Last reset from Reload
1 Virtual Ethernet/IEEE 802.3 interface(s)
96 FastEthernet/IEEE 802.3 interface(s)
26 Gigabit Ethernet/IEEE 802.3 interface(s)
403K bytes of non-volatile configuration memory.
Uncompressed configuration from 7028 bytes to 17442 bytes
During Switchover the Standby Supervisor
141414
© 2004 Cisco Systems, Inc. All rights reserved.
RST-3508
9805_05_2004_c2
Cisco Catalyst 4507R/4510R Supervisor
Redundancy
Startup configuration
(by issuing the write memory command)
Boot-variable
Configuration-register
Calendar
VLAN database
What Is Synchronized?

Related product manuals