Cistermiser IRC User Manual

8 www.cistermiser.co.uk
Solid wall/ceiling
Remote sensor
(Mains and/or Battery-powered)
Connect cable from solenoid using the floating socket supplied
Make sure cable polarity is correct: 1 to 1 and 2 to 2
If mains
power is
used connect
230v here
Wall fixings
(not supplied)
Suitable
screws
(not supplied)
Solenoid
mounting
screw
Floating
socket
Secure cable
clamp after wiring
Cable 1mm
2
(max 10m)
to solenoid
Cavity wall/ceiling
(Flush mounted)
Wall/
ceiling/tile
Mounting
bracket
Sensor
Mounting screws
locate at the back
of the battery
compartment
(hand tight only)
Front cover
Use
template
in box to
cut hole
www.cistermiser.co.uk 9
Use mounting bracket to secure sensor in a cavity wall/ceiling

Cistermiser IRC Specifications

General

Brand	Cistermiser
Model	IRC
Category	Control Unit
Language	English