Citadel XR1 G3 User Manual

Intruder alarm system
Operating
Instructions
Key
These operating
instructions cover the
following intruder
system:
ÿ
8EP 394 XR1G3
panel with built in
keypad
For Clarity, the
information given on
setting the system,
assume that all Programs
use a timed or final door
setting routine.
Unset system indications
An unset system will have both Day and Power
indicators lit. This is a normal
indication when the system is
disarmed.
Note: If the Power indicator goes off at
any time then there is a mains supply
failure at the security panel, consult your
servicing organisation.
Set System indication
An active ‘Set’ system will have only the Power
indicator lit. This is an armed
system indication.
4188-693 issue 1_8/01 1
Unset system indications
Power
0123
5678
Chime Omit
Reset
4
9
Set
Prog
PA
Attack
Tamper
Day
1 2 3 4 5 6 7 8
8EP 394 XR1 G3 panel
with built-in keypad
Power
Accenta
/!
mini
0123
5678
Chime Omit
Reset
4
9
Set
Prog
PA
Attack
Tamper
Day
1 2 3 4 5 6 7 8
LED steady On indication
LED Off
Strobe
Bell
NOTE: In general a flat beep is
an indication of an incorrect key press.
Sound description
Internal sound
External devices
LED flashing indication
Day
Powe
r
Powe
r
XR1
Intelligent Security & Fire Ltd

Citadel XR1 G3 Specifications

General

Brand	Citadel
Model	XR1 G3
Category	Security System
Language	English

Summary

CITADEL XRI Operating Instructions

Unset system indications

Describes normal indications when the system is disarmed.

Set System indication

Describes the normal indication when the system is armed.

Access codes

How to operate Personal Attack

Explains using keypad buttons to activate the alarm, regardless of system state.

Programs 1, 2 and 3

How to set the system (on program 1)

Push to Set Switch

Describes using a push-button to complete the setting procedure, removing exit time.

Keyswitch Set

Explains using a remote keyswitch as an alternative to arming the system.

Faults during setting

Explains sounder tones for open zones during setting and how to investigate.

How to unset the system (turn off)

How to set program 1,2 or 3

How to Quick set

How to Omit zone(s) on setting system

Fire Alarm

Describes the fire zone operation whether the system is set or unset.

How to set Chime Zones

Operator's Program mode

To exit operation at any time

Explains how to quit the current function or menu level using the Reset key.

How to enter Operator's program mode

Details the steps to access the programming menu with Day and Power indicators lit.

How to view the events log

How to create/omit User 2 code

How to change current user code

How to carry out Alarm and Walk tests

Servicing organisation details

Provides fields for recording service provider name, telephone, and account number.

Quick Reference

Operator's program mode menu map

A visual guide mapping the Operator's Program Mode functions and key presses.