To Next PageTo Next Page
Need help?Do you have a question about the Citadel XR2 and is the answer not in the manual?
General| Brand | Citadel |
|---|---|
| Model | XR2 |
| Category | Security System |
| Language | English |
Explains the 4-digit code for system operation and default settings.
How to activate the alarm system for personal attack.
Procedure for fire alarms, including sounds and actions.
Enter code and verify the green Day indicator is lit.
Key in code to stop entry tone; check for Day indicator light.
If indicators are lit, seek assistance before investigating intrusion.
Enter code and listen for exit beeps to start the process.
Press Prog and select program 2 or 3 for part-set operation.
Enter your code to stop the alarm sound and external siren.
Zone, Tamper, or Attack indicators show the cause of the alarm.
Contact installer for details on cancelling police response.
Press the Reset key and check indicators for system reset.
Contact installer if system enters fault-lockout.
Use a 6-digit anti-code provided by the installer to reset the system.
Key in code to start the exit procedure for omitting zones.
Press Omit, then zone numbers to be omitted; indicators will flash.
Key in code to start the exit procedure; exit beep tone will start.
