48 49
15. INITIAL SETTING
If the calendar, local time or various alarm functions for the watch do not operate
correctly, follow the procedures listed below.
* These instructions should always be completed when new batteries are installed.
(1) Pull the crown out to the 2nd
step position (mode hand
display: 0).
(2) Press and hold down the all
buttons simultaneously for more
than 2 seconds.
(3) Release all buttons to reset the
watch's hands.
(A) confirmation beep will
sound with the completion of
this operation.
<All reset>
Day hand
Date hand
Button (C)
Local time hands
AM/PM hand
Button (A)
2nd step position
Button (B)
If the hands do not move to the above positions, see "15. INITIAL SETTING".
If there is no input for about 20 seconds, the watch will automatically return to the
normal display. Press the any button to manually return to the normal display.
To Next Page
Loading...
