Notes:
• Avoid rapid correction of the date when the watch hands are between
the hours of 9:00 PM and 4:30 AM. Correcting the date during this time
period may prevent the date from changing on the following day. Set the
date and day aer the hands have moved outside this time period.
• is date displayed by this watch is based on a 31-day month. e date
must be changed by operating the crown on the rst day of the following
month in those months with less than 31 days (months having 30 days and
February).
5. Using the Rotating Bezel
e rotating bezel can be used as a reference for elapsed time during diving or
for the amount of time remaining relative to a predetermined amount of time.
[Setting the Rotating Bezel]
• Only turn the rotating bezel to the le. It cannot be rotated in the
opposite direction (to the right) to prevent the risk of incorrect operation.
Determination of Elapsed Time Determination of Remaining Time
Align the
▼
mark on
the rotating bezel with
the minute hand.
After a certain amount
of time has elapsed, the
elapsed time can be
determined from the
scale on the rotating
bezel.
The remaining time
can be determined by
aligning the
▼
mark on
the rotating bezel with
the target time.
Elapsed
time
Turning direction
Remaining time
To Next Page
Loading...
Need help?
General