Citizen 8651 - Insufficient Charge Warning Feature; Overcharging Prevention Feature; Quick Start Feature

64
65
<Insucient Charge Warning Feature>
When the watch becomes insufficiently charged, the
second hand begins 2-second interval movement to
indicate that the watch is insuciently charged.
• Although the watch continues to run normally at this
time, the watch will stop aer about 4 days have passed
since the watch has become insufficiently charged.
Charge the watch by exposing to light to return to the
original 1-second interval movement.
Sufficiently charge the watch even after it has returned to 1-second interval
movement to ensure that it can be used comfortably. ere is no risk of overcharging
since the watch is provided with an overcharging prevention feature.
• Although the watch will begin to run again when exposed to light after it has
stopped due to being insufficiently charged, since the time is incorrect, reset the
time aer suciently charging the watch.
<Overcharging Prevention Feature>
When the secondary battery becomes fully charged as a result of exposing the watch
dial (solar cell) to light, the overcharging prevention feature is activated automatically
to prevent the battery from being charged further. Consequently, there is no
degradation in the performance of the solar cell or secondary battery no matter how
oen the watch is charged. is lets you expose the watch to light without worrying
about overcharging.
<Quick Start Feature>
e watch will stop running if it is not charged at all. e watch hands will begin to
move aer about 10 seconds when the watch is exposed to light. (e time until the
hands begin to move varies depending on the model of the watch and the intensity
of the light.) However, please note that the watch may stop again since it will not be
adequately charged if the light is blocked at this time.
2 seconds
2 seconds