Screw lock type button
Recessed type button
Month Correction Button:
e month correction button is located at the 3:00 position. ere are two types of
the month correction buttons. One is a screw lock type and the other is a recessed
type. Be sure to refer to the section that applies to your button type. Identication can
be made as follows:
Screw lock type button
e screw lock type button has a at smooth end that protrudes slightly from the end
of the screw lock.
e recessed button type has a dimpled appearance at the end.
In the case the month correction button is of the screw lock type, operate the month
correction aer rst turning the “button cover” around the outside of the button to
the le to loosen the screw. e button is unable to operate properly if the screw is
not adequately loosened. Once you have nished operating the month correction
button, turn the “button cover” to the right and tighten securely. Please note that
if the button cover is not adequately tightened, the button may be bent or it may be
accidentally depressed while wearing the watch causing the month to be changed
inadvertently.
Recessed type button
e month is changed by simply pressing and releasing the recessed button with a
narrow pointed object. ere is no screw lock mechanism to release for this type.
To Next Page
Loading...
