B) WINDING THE MAINSPRING
C) SETTING THE TIME
D) SETTING THE DATE
A) DISPLAYS AND BUTTONS
B) WINDING THE MAINSPRING
Automatic winding watch can also be hand winded by turning the crown clockwise
in Normal position.
Wind several times clockwise. It will start to move naturally.
C) SETTING THE TIME
1. Pull the crown out to the 2nd Click Position so that
the second hand stops at (0) position.
2. Turn the crown to set hour and minute hands.
3. After the time has been set, push the crown back to the Normal position.
To Next Page
Need help?
General
