Citizen 9015 Quick Start Guide

Basic s
p
ecification
Function
Automatic & manual winding
Display by means of hands: hour, minute, second.
Date calendar
Stop second device
Shock-absorber for balance staff
Technical characteristics
Balanceable weight of hands
Second hand Max. 0.60μN ・m
Minute hand
Max. 1.25μN ・m
Hour hand
Max. 1.50μN・m
Hands fitting force
Second hand Max. 30N
Minute hand Max. 50N
Hour hand Max. 50N
Lift angle
51°
Casing
Non-corresponding to "Divers' watches" defined by ISO6425
Time performance
※Accuracy of the mechanical watch is different from the daily rate of the quartz watch and the accuracy will change
maximum of several ten seconds during rewinding the spring, then the accuracy of the half winding condition will
be different from that of full winding condition.
<Time performance measurement condition>
Accurac
y
Measure within lapse of 10～60 minutes from full winding.
Posture difference
Measure accurac
y
in 4 different
p
ostures shown on the
ri
g
ht
p
icture within la
p
se of 10 ~ 60 minutes from full windin
g
.
※Direction of 4 postures ①Date Dial side Up ②6 o'clock side up ③9 o'clock side up ④3 o'clock side up
Runnin
g
time
Measure the runnin
g
time from full windin
g
.
※The mainspring becomes fully winded by rotating the ratchet wheel 7.5 times (turning the crown 40 times).
Cal. 9015
Accuracy
Posture difference
Running time
-10～30 seconds/day
Under 40 seconds/ day
More than 42 hours
Φ26.0mm
AUTOMATIC & MANUAL WINDING MOVEMENT WITH DATE
Ligne
Case fitting diameter
11-1/2'''
Φ25.6mm
Jewels
Overall diameter
3.90mm
28800 vibrations per hour
Vibration frequency
24 Jewels
Total height
①
②
④③

Citizen 9015 Specifications

General

Brand	Citizen
Model	9015
Category	Watch
Language	English