27
Adjusting the time difference
3.
Return the crown to Position to complete the
setting. (In case of a screw down crown, lock the
crown. See page 5.)
• To reset to the original time, rotate the hour hand in a
direction opposite to the direction in which it was moved
to correct the time difference.
2.
Rotate the crown to correct the time difference.
•
Rotate the crown to the right (clockwise) to move
the hour hand in one-hour increments, or to the left
(counterclockwise) to move the hour hand in one-
hour decrements.
• The hour hand is synchronized with the date. As the hour
hand is moved forward to the 12 o’clock midnight position,
the date will be updated as well.
• Adjust the hour hand to the local time. Make sure to set AM and PM correctly.
• Rotate the crown until the hour hand is fully forwarded by an hour. Forwarding the
hour hand only half-way may cause incorrect motion.
Position
0
To Next Page
Loading...
