Citizen C300 Abbreviated Instruction

C300 Abbreviated instruction
Using the world time
1.
Press and release the lower right button
M
repeatedly to
move the mode hand to point to [TME] or [CAL].
The calendar is indicated on the digital display when you choose [CAL].
2.
Press and release the upper right button
A
or lower left
button
C
repeatedly to indicate an area name you want on
the digital display.
The time or calendar of the area you choose is indicated on the digital
display.
Table of time zones and representative areas
• The time zone in the table is based on UTC (Coordinated Universal Time).
• Countries or regions may change time zones for various reasons.
Time
zone
Area name Representative area
0
UTC
Coordinated Universal
Time
LON
London
+1
PAR
Paris
ROM
Rome
+2
CAI
Cairo
IST
Istanbul
+3
MOW
Moscow
KWI
Kuwait
+4 DXB
Dubai
+5 KHI
Karachi
+5.5 DEL
New Delhi
+6 DAC
Dhaka
+7 BKK
Bangkok
+8
SIN
Singapore
HKG
Hong Kong
BJS
Beijing
Time
zone
Area name Representative area
+9 TYO
Tokyo
+10 SYD
Sydney
+11 NOU
Noumea
+12 AKL
Auckland
–10 HNL
Honolulu
–9 ANC
Anchorage
–8 LAX
Los Angeles
–7 DEN
Denver
–6
CHI
Chicago
MEX
Mexico City
–5
NYC
New York
YUL
Montreal
–4 CCS
Caracas
–3
RIO
Rio de Janeiro
BUE
Buenos Aires
Using the zone-set function
You can hide unnecessary ones in the 30 areas and UTC, which the watch can
indicate the time of; you can also activate/deactivate summer time for those areas
separately.
1.
Press and release the lower right button
M
repeatedly to
move the mode hand to point to [SET].
2.
Pull out the lower right button
M
.
The digital display starts blinking.
3.
Press and release the upper right button
A
repeatedly to
indicate an area name you want on the digital display.
4.
Press and release the upper left button
B
to select “SET”
(display) or “OFF” (hide) of the area.
• Each time you press the button, “SET” and “OFF” changes alternately.
• Each time you press button
C
in this step, the summer time setting
changes alternately.
5.
Repeat steps 3 and 4 to set other areas.
6.
Push in the lower right button
M
to finish the procedure.
Correcting the reference position
1.
Press and release the lower right button
M
repeatedly to
move the mode hand to point to [CHR].
2.
Pull out the lower right button
M
.
The reference position becomes adjustable.
Correct reference positions:
All hands (except the mode hand:
12 o'clock position (straight above)
3.
Press and release the upper left button
B
repeatedly to change the target to
be adjust.
• Each time you press the button, the target changes and digital indication
changes as follows:
UTC hour/minute hands (UTC) → hour and 24-hour hands (H.R.) → minute
hand (MIN) → (back to the top)
4.
Press and release the upper right button
A
or lower left
button
C
to adjust the target.
• Pressing and holding the button move the hands continuously.
5.
Repeat steps 3 and 4 to adjust other targets.
6.
Push in the lower right button
M
to finish the procedure.
Resetting the watch - All Reset
1.
Pull out the lower right button
M
.
2.
Press buttons
A
,
B
and
C
at the same time.
All the digital indication lights up and the watch is reset.
After All Reset
The watch changes into reference position adjustment status by pressing button
B
. After pressing button
B
, adjust the reference positions referring to steps 3 -
6 of
Correcting the reference position
. After the adjustment, set the time and
calendar.
MHP
24
2
4
6
8
10
12
14
16
18
22
UTC
24
4
8
16
20
PM AM
20

Citizen C300 Specifications

General

Brand	Citizen
Model	C300
Category	Watch
Case Material	Stainless Steel
Band Material	Stainless Steel
Crystal	Mineral