28
This watch receives the clock time information sent by satellite.
This watch only receives time information. Location information cannot be acquired.
◆
Receiving the satellite time signal
The satellite time signal can be received using the following three methods. You
can also check whether the last attempt to receive the time signal was successful
or not. (See page 35.)
Reception type Method Time taken
Manual reception 1
Normal reception (See page 35.)
Approx. 4 to 20 seconds*
Manual reception 2
• When the leap second has been updated
• When all reset has been performed (See
page 38.)
Approx. 21 seconds to 13
minutes
Circumstantial reception
Automatic reception (See page 42.)
・
These reception methods can only be performed when the crown is in position
0
.
Before receiving the satellite time signal
To Next Page
Loading...
Need help?
General
