Citizen CC1x - Manual Reception

38
◆
Manual reception 2
Use this method when the leap second has been updated or when all reset has
been performed.
1. Ensure that the crown is in position
0
.
2. Press and hold the lower right button
Ⓐ
for seven
or more seconds.
• Afterindicatingthepreviousreceptionresult,thetail
of the second hand moves to "RX." Continue holding
the button until the second hand rotates around once
more and indicates "RX."
• Ittakesfrom21secondsto13minutestocompletethe
satellite time signal reception.
• Theillustrationsinthisinstructionmanualmaydiffer
from the actual appearance of your watch.
• Dependingonthemodel,theheadofthesecondhand
indicates the Reception-in-progress indication (RX)
and the reception result.
0 1 2
Ⓐ
Receiving the satellite time signal