Citizen CC1x - Page 58

57
English
Checking and correcting the current reference position
1. Ensure that the crown is in position
0
.
2. Press and hold the upper right button
Ⓑ
for seven
seconds.
All hands and the date indication move to indicate the current
reference position.
3. If the reference position is correct, press the upper right
button
Ⓑ
to return to current time indication.
Correct the reference position by taking the following
steps if the position is not accurate.
4. Pull the crown out to position
2
.
This will enable you to correct the reference position.
0 1 2
Ⓑ
◆
Checking and correcting the current reference position