8. Memory recall
CH-403C
MEMORY
START
POWER
SELECT
This blood pressure monitor has a function which is able to
display last measured value.
SYSTOLIC mmHg DIASTOLIC mmHg
PULSE/min
AVE. 12 34 567
• By a first depressing of “Memory Recall Switch”, averaged
blood pressure is displayed and “ ] ” mark flashes to no-
tify that the displayed value is averaged value.
SYSTOLIC mmHg DIASTOLIC mmHg
PULSE/min
AVE.
12 34 567
• By a second depressing of “Memory Recall Switch”, the
value for latest (last measured value) blood pressure is dis-
played. The “ ] ” mark shifts to right (from “Ave.” to “1”)
and notify that the value is the last measured (newest one)
value.
• Press the “Memory Recall Switch” to recall the last mea-
sured blood pressure.
The last measured systolic and diastolic blood pressure are
displayed (Value of the pulse is not memorized nor dis-
played).
SYSTOLIC mmHg DIASTOLIC mmHg
PULSE/min
AVE. 12 34 567
• As per the same above-mentioned method, you may recall
7 last measured values by depressing of “Memory Recall
Switch”.
SYSTOLIC mmHg DIASTOLIC mmHg
PULSE/min
AVE. 12 34 567
• By a third depressing of “Memory Recall Switch”, the value
for next later blood pressure is displayed. The “ ] ” mark
shifts to right (from “1” to “2”) and notify that the value is
the next later one.
- Eng 10 -
To Next Page
Loading...
Need help?
General
