Protect the nature environment:
Please help protect natural environment by respecting na-
tional and/or local recycling regulations when disposing of
the batteries and the products at the end of their useful lives.
Reference European standard:
This products complies with EC instructions 93/42/EEC (Medi-
cal Device Directive) and with the following standards: EN
1060-1: 1995 “Noninvasive Sphygmomanometers, Part 1
General Requirements” and EN 1060-3: 1997 “Noninvasive
Sphygmo-manometers, Part 3 Supplementary Requirements
for Electromechanical Blood-Pressure Measuring Systems”.
Manufacturer:
Name: Premier Precision Ltd.
Address: Block E, G-H, 6
th
floor,
Phase 2, Yip Fat Factory Building,
73-75 Hoi Yuen Road,
Kwun Tong, Kowloon, Hong Kong
European Representative:
Name: WvW elektronische Geräte Vertrieb GmbH.
Address: Robert-Koch-Straße 20,
D-80538 München,
GERMANY
MEASUREMENTS
1. Turn power ON
Press the “Power switch” for power ON.Insert the Hose plug from the cuff into the hose socket at
the mainframe until it is tightly connected.
English
- Eng 5 -
To Next Page
Loading...
Need help?
General
