Citizen CL-S700 Installation Manual

CL-S700 INSTALLATIONMANUALforOPTIONPEELER
１．Remove the front 3
p
arts. Remove the 2
p
arts in the both side first, then remove the
p
art
in center.
Remove 3 screws
Remove 2
Remove 2 screws
Remove 3
t
【CAUTION when using the option peeler】
Print speed must be set to 7IPS or below

Citizen CL-S700 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Max Print Width	4.1 inches
Media Sensors	Reflective and transmissive
Ribbon Length	450 meters
Interfaces	Serial (RS-232C)
Print Speed	Up to 10 inches per second
Media Thickness	0.0025 to 0.010 inches