1-5-2. Changing the Print Server Configuration
By clicking “Change Settingst” button, screen is changed for the page to change the
network settings.
[Back To Home] button: The page moves back to the page to check the current network settings.
[Cancel Settings] button: The entry data on this page is canceled.
[Save Settings] button: The entry data on this page is saved and move the page below then the
printer reboots after few seconds.
When the operation is complete, the printer restarts automatically.
When the network setting is set to automatically obtain the IP address from the DHCP
server, the IP address assigned may be different from the previous one.
To Next Page
Loading...