① “Seek” button
Start a search for the printers on the network.
The search function waits for a response for the duration set for ⑦.
② “Edit config” button
Change the settings of the selected printer.
③ Printer information list
A list of discovered printers.
④ Printer information
Single click to select a printer and double click to change settings.
⑤ Configuration display section
View the settings of the selected printer.
⑥ Client condition display
When “Busy” is displayed, operations to search, change settings, and so on are
prohibited.
If you click “Stop”, the “Busy” status is cleared forcibly.
⑦ Communication timeout
You can configure the time-out duration for searches and other operations.
⑧ Status log
View the status of the utility.
To Next Page
Loading...