—14—
z Front cover
Open and close this cover to clear a cutter lock.
z Front cover release button
Press this button to open the front cover.
z Power switch
Press this button to turn the power on or off.
Operation panel
z POWER LED (green)
Lights when the power is on, turns off when the power is off.
Flashes when data is incoming or a memory error has occurred.
z PAPER LED (orange)
Lights orange when paper is low (paper near-end) or there is no paper (paper
end).
z ERROR LED (red)
Flashes if the print head is hot, the paper cover is open, a cutter lock occurs,
and so forth.
Refer to 4.3 Clearing a Cutter Lock (2)
CAUTION
Do not open the maintenance cover.
POWER LED (green)
PAPER LED
(orange)
ERROR LED (red)
FEED button