To Next Page
J
jameshoffmanAug 13, 2025
What to do if Citizen Printer says paper end?
- DDaniel NguyenAug 13, 2025
If your Citizen Printer indicates a paper end or near-end condition, prepare or load a new paper roll.
What to do if Citizen Printer says paper end?
If your Citizen Printer indicates a paper end or near-end condition, prepare or load a new paper roll.
What to do if my Citizen CT-S751 Printer is experiencing paper jams?
If your Citizen printer encounters a paper jam where the paper cannot exit, open the paper cover and carefully pull the paper out.
What to do if I encounter a cutter error on my Citizen CT-S751?
If your Citizen printer's auto cutter stops during operation due to foreign matter or a paper jam, remove any jammed paper, including scraps. Also, remove the paper roll loaded in the holder.
What to do if my Citizen Printer indicates 'Cover Open'?
When the cover open indication appears on your Citizen printer, check the paper, gently pull it straight out of the printer by a couple of centimeters, and then close the cover.
What to do if the auto cutter cannot move on Citizen Printer?
If the auto cutter on your Citizen printer cannot move due to a paper jam or another obstruction, remove the cause of the trouble and then press the FEED button.
What happens if the print head gets too hot on my Citizen CT-S751 Printer?
If the print head of your Citizen printer exceeds a specified temperature when printing dense characters or for an extended time, printing will resume automatically once the print head cools down.
How to improve printing quality on a Citizen CT-S751?
To maintain optimal performance, it's recommended to clean your Citizen printer's print head and platen periodically, approximately every 2 to 3 months.
How to resolve printing speed issues on Citizen CT-S751?
To resolve printing issues related to speed changes on your Citizen Printer, enable MSW2-3 (buffering). Increase the baud rate of MSW7-1 (serial baud rate). Also, consider changing MSW10-2 (print speed) to a lower level.
General
