40
——
3.7 Lightning USB host interface board
In addition to printer control via USB (Lightning) communication, Lightning USB host
interfaces can control peripheral devices connected via a USB port.
Connecting the Interface Cable
1. Turn off the power.
2. Conrm the orientation of the interface cable and connect it to the port.
3. Connect the other connector to the interface connector of an Apple device.
CAUTION
When disconnecting the cable, always hold the connector.
Place the interface cable so that people do not trip on it.
Do not connect multiple interfaces at the same time.
Hold the connector of the LAN cable perpendicular and straight when connecting or discon-
necting it. Doing it at an angle may cause the connector to misconnect.
To Next Page
Loading...
