—46—
The status display for various messages is shown below.
*1: If the paper cover or front cover is open in standby.
*2: If the paper cover or front cover is open when printing or feeding paper.
*3: Buzzer sounds when MSW5-1 (buzzer setting) is set to ON. Note, however, that some combinations of
settings of MSW5-1 and MSW10-6 may change the condition in which buzzer sounds.
Status
POWER LED
(green)
PAPER LED
(orange)
ERROR LED
(red)
Buzzer
*3
Paper near-end Lights Lights — —
Paper-end Lights Lights Lights Yes
Paper cover open or front cover
open
*1
Lights — Lights Yes
Paper cover open or front cover
open
*2
Lights — Yes
Cutter locked Lights — Yes
Memory error — — Yes
Print head hot Lights — —
Low-voltage error Lights — Yes
High-voltage error Lights — Yes
Waiting for macro to execute — — —
To Next Page
Loading...
