25
1
Press and release the lower left button while
the crown is in position
.
The maximum water depth hand indicates the
maximum diving depth at the last measurement.
2
Press and release the upper left button while
the maximum depth is indicated.
The alarm sounds for 10 seconds.
• The maximum water depth indication ends about 10
seconds after the alarm sound stops.
• Press and release the lower left button to stop the
alarm.
Water depth measurement Water depth measurement
Checking the alarm
• Make sure that the watch is not wet before operating the crown or any buttons.
• To unscrew/screw the crown/button, see page
11
.
To Next Page
Loading...
