30
About storing the maximum water depth
The maximum water depth hand indicates the maximum diving depth of each
measurement.
The maximum water depth is ready to be stored when either of the following
conditions is met and the stored record can be indicated after finishing
measurement:
• Water depth indication remains deeper than 1 m for 3 minutes or more in a
measurement.
• Water depth indication remains deeper than 8 m for 1 minutes or more in a
measurement.
About the record
• When a new record is stored, the previous record is overwritten.
• No maximum water depth is stored when measurement was interrupted because
of sudden change of depth (→ page
33
) or other reasons.
Reviewing the maximum water depth record
To Next Page
Loading...
