43
Checking and correcting the reference position Checking and correcting the reference position
5
Press and release the lower left button to
change the hand to be corrected.
The maximum water depth hand moves to the
10-second position and the water depth hand becomes
ready to have its reference position adjusted.
• Each time you press and release the lower left button
, the target hand is switched.
6
Press and release the upper left button .
Each time you press and release upper left button ,
the hand moves by 1 step.
• The hand moves continuously while you are pressing
and holding the button.
7
Push the crown in to position to finish the
procedure.
To Next Page
Loading...
