25
English
Charging your watch
Power save function
The second hand stops automatically to save power when the watch has been kept
in a dark place for a certain period of time and it cannot generate power.
• The watch works normally even while saving power.
• The power save function does not operate under the following conditions:
- The crown is in position
1
or
2
.
- During 2-second interval movement (insufficient charge warning status)
Canceling the power save function
The power save status ends and the hands return to normal indication as the
crown is pulled out to position
1
or
2
or the dial is exposed to light and power
generation starts.
To Next Page
Loading...
