26 27
Reception status
Signal reception failed
Radio wave reception environment was very
good
Radio wave reception environment was good
Radio wave reception environment was not very
good
Reception
level
NO
H
M
L
* The time display may shift slightly depending on the reception environment and
internal watch processing even if radio waves are properly received.
* H, M and L indicate the reception status and are not connected to the performance of
the watch.
• If NO is indicated, find a location or direction where the reception is better and
perform on demand reception again. (p. 20)
WW
7. Confirming Reception Status
• The result of the radio wave reception can be confirmed.
• The daylight saving time setting status of the home city can be confirmed.
1. Set the mode to TME, CAL or RX-S.
2. Press the lower right button (A) once to display the reception status. The second hand
will move to H, M, L or NO.
• The daylight saving time setting status for the home time is displayed on digital
display 2 (flashes alternately between SMT and ON or OFF).
• The radio wave reception indicator points to
JPN, EUR or USA.
3. Press the lower right button (A) once.
• The watch returns to the normal time display
(1-second interval movement).
• It also returns automatically to normal
display if there are no operations for 10
seconds.
[Digital display 2]
To Next Page
Loading...
Need help?
General