16 17
3.
Set the home time.
If the home time is correct,
(1) Set the time manually (p. 46)
(2) Set the time by receiving the radio
wave (p. 20)
Caution:
If the home city is set to a city that
is outside the reception area, the
radio wave cannot be received.
Turn off the automatic reception
and set the time manually.
(p. 66
oo
69)
4.
Set digital display 1.
The world time or date can be
displayed on digital display 1.
Also, the mode can be switched
in order to use the alarm, timer
or chronograph. (p. 40)
WW
3. Basic Watch Operations
* The watch receives the radio wave from the radio wave transmitter located in the
home city’s region.
1.
Check the
charge level.
(p. 38)
2.
Set the home city.
If the city in which you
are situated is displayed
in digital display 2,
(1) Pull out the crown to
position 1 and turn to
align the mode hand
with TME.
(2) Press button (A) or (B)
to call up the home city
in digital display 1.
(3) Press button (A) and
button (B) at the same
time to display the home
city in digital display 2.
To Next Page
Loading...
Need help?
General